Openers
Signs your garage door opener needs to be reprogrammed
Remotes and openers sometimes lose their connection. Here's when to reprogram, and when the problem is something else.
When you should reprogram
After you move into a new home, so previous owners' remotes stop working. After a remote is lost or stolen. After some battery changes or power outages. And when you add a new remote, keypad or car button.
Signs it's a programming problem
The wall button works but the remotes don't. One remote works and another doesn't. The door opens or closes by itself. Or the keypad lights up but nothing happens.
How reprogramming works
Most openers have a learn button on the motor unit. Pressing it clears or adds remotes. Older openers may use small switches instead. We can program every remote, keypad and car button on the same visit.
Reprogramming after you buy a home
Previous owners, contractors and neighbors may still have working remotes. Clearing the opener's memory on move-in day, then adding back only your remotes, is a simple, free security step.
If reprogramming doesn't work
Check the remote's battery and make sure lock mode isn't on. If the learn button lights but won't accept a remote, the receiver or logic board may have failed, or the remote may be the wrong frequency for your opener. We can test it and replace the part that failed.
About the author
Paul RichmondPaul Richmond owns Garage Door Solutions, the family business he bought from his father, Curt Richmond. He writes our homeowner guides from the questions our technicians answer every day across Collin, Grayson and Fannin counties. Garage Door Solutions is a division of American Service Center, serving North Texas since 1985.
Meet our team →
Amarr
C.H.I.
Clopay
Genie
LiftMaster
Linear
Marantec
Wayne Dalton