Maintenance
How to prepare your garage door for winter
North Texas winters are short, but an ice storm or hard freeze can leave a door stuck or a spring snapped. A little prep in the fall prevents most cold-weather problems.
Check the weather seal
The rubber seal on the bottom of the door keeps out cold air and water. If it's cracked or flattened, replace it. On icy mornings a worn seal can freeze to the driveway, so the opener strains and may reverse.
Lubricate the moving parts
Cold thickens old grease. Use a garage-door lubricant on the hinges, rollers and springs, not heavy grease, so everything moves freely in the cold.
Test the balance and opener
Springs lose tension with age, and cold makes metal more brittle. Disconnect the opener and lift the door halfway. If it falls or rises on its own, the springs need adjusting. Also test the auto-reverse before winter.
If the door freezes shut
Don't keep pressing the button. That can strip the opener gear or burn out the motor. Gently chip away ice along the bottom seal, or use a hair dryer, then try again.
What an ice storm does to a garage door
Freezing rain can glue the bottom seal to the driveway and coat the tracks with ice. If the opener tries to lift a frozen door, it can strip its gear or pull the top panel. On icy mornings, check the bottom of the door before you press the button.
Signs your door isn't ready for cold weather
Watch for a door that's slow or jerky on cold mornings, a spring with visible rust or gaps, a bottom seal that lets in light, and an opener that strains or reverses. Any of these is worth a tune-up before the first freeze.
About the author
Paul RichmondPaul Richmond owns Garage Door Solutions, the family business he bought from his father, Curt Richmond. He writes our homeowner guides from the questions our technicians answer every day across Collin, Grayson and Fannin counties. Garage Door Solutions is a division of American Service Center, serving North Texas since 1985.
Meet our team →
Amarr
C.H.I.
Clopay
Genie
LiftMaster
Linear
Marantec
Wayne Dalton